|
Detailed Selling Lead DescriptionModel: XQ-802
Min. Order: 1
1. Automatic current control device "standard vol tang" (KV)
This device can automatically adjust and control current and voltage, so that the workpiece surface, penetrate into deep powder to obtain the best coating quality.
2. Electrostatic Discharge Device
When the gun close to the work, current and voltage will be automatically adjusted. Needs of high-voltage parts are usually flat, while in the spraying concave workpiece requires low voltage to make the powder penetrated into the workpiece cavity. The operation of this device will allow you to be more handy.
3. Electrode clean air devices
Unique "three air" design, can automatically clean needle electrodes at the plot powder, to maintain effective discharge, to avoid coating defects.
Host: Input Voltage :200-240V. 50Hz
Input Power: 60W
For the powder and gas source: electromagnetic valve control voltage: 24V DC
Input Pressure :0-0 .6 Mpa
Output Pressure :0-0 .5 Mpa
Maximum Air Consumption: 13.2m / h (0.4Mpa pm)
Powder barrel solvent: 55L 45L
Gun: Input air pressure: ≤ 0.3Mpa
Flour quantity: Maximum 600g/min
Output Voltage: 0 ~-100KV
Output current :0-250uA
Gun Weight: 490g
|